Internet Of Things | IoT

#

An Intro to Bluetooth Mesh

  • Posted by admin on November 2, 2017

A Bluetooth® mesh network lets you establish a many-to-many relationship between wireless devices and allows them to relay data to other devices not in direct radio range. In this way, Bluetooth mesh networks can span wide physical areas and support tens, hundreds, or even thousands of devices.

Motivation for Mesh

Mesh topologies offer the best platform for meeting increasingly common communications requirements of commercial and industrial applications, from building automation to sensor networks. Bluetooth mesh was designed to provide:

Bluetooth mesh networking is a many-to-many topology.

– Large-area coverage
– Just-works interoperability
– Device monitoring and control
– Low energy consumption
– Optimization for efficiency and scalability
– Compatibility with smartphones, tablets, and PCs
– Industry-standard, government-grade security

Other low-power wireless technologies that support mesh topologies are not optimal for solving the challenges the industrial IoT needs to address. Low data transmission rates, limited numbers of hops, scalability restrictions, and lack of mobile device support prohibited the development of new IoT solutions. Creating an industry-standard mesh technology based on the Bluetooth Low Energy (LE) stack allowed us to meet these requirements without the associated limitations and constraints.

Message-Oriented Communication

Bluetooth mesh networking uses a publish/subscribe messaging system that allows devices to send messages to groups of devices, such as Factory Lights. When a device publishes a message to a group of addresses, all the other devices subscribed to that address receive a copy of the message, process it, and react.

Imagine a set of outdoor lights installed in a factory. Each light is configured to subscribe to Factory Lights messages. When a Bluetooth mesh light switch sends an ON message to the Factory Lights address, all the lights in the factory receive the ON message and react by switching on.

Relaying

Bluetooth mesh networks allow devices to communicate with each other across large areas, making them ideal for shopping malls, airports, or office buildings. Walls and other physical barriers in these facilities may prohibit direct radio contact between devices. To solve this problem, a Bluetooth mesh network lets you designate some devices as relays.

Relay devices retransmit received messages, allowing them to reach devices that are not in radio range of the device that published the original message. A message may be relayed multiple times up to a maximum of 127 hops.

Bluetooth mesh networks relay messages from node to node.

Managed Flooding

In a Bluetooth mesh network, messages are not transmitted along a specific path. Instead, all devices in range receive messages. Those acting as relays retransmit the message to all other devices in range.

With a flood approach, there’s no need for any device to act as a centralized router, the failure of which could render the entire network inoperable. Specific routes being unavailable could also have a catastrophic impact on the network, and this too is avoided with a flooding approach. A flooding approach allows for multiple paths by which a message can transmit, making for a more reliable network.

Optimizing Energy Use

A Bluetooth mesh network includes several measures which optimize energy used by individual devices and the network as a whole.

All packets may limit the number of hops a message takes as it’s relayed. Heartbeat messages, transmitted at intervals, allow the network to learn about its topology and the number of hops to each device. This avoids messages being relayed unnecessarily. Every device also contains a message cache so it can determine if it’s seen a message before, discarding redundant messages and avoiding unnecessary processing.

Additionally, power-constrained devices, such as battery-powered sensors, may be designated as low-power nodes. Low-power nodes work in conjunction with one or more devices designated as friends. Friends act on behalf of the low-power node, storing messages and only delivering them to the low-power node when asked. Working with a friend allows the low-power node to schedule its use of the radio to receive messages to whatever frequency makes sense for the device, but at a much lower frequency than if it had to listen for messages all the time.

Security

Security is at the heart of the design of Bluetooth mesh networking and its use is mandatory. Every packet is encrypted and authenticated. Replay attacks are prevented by judicious use of sequence numbers. Man-in-the-middle attacks are protected against by using asymmetrical cryptography during important procedures. Protection against trashcan attacks, which exploit discarded devices, is managed through regular security key refreshes.

Security is mandatory in a Bluetooth mesh network.

Separation of Concerns is an important principle reflected in the security of Bluetooth mesh networking. Security of the network and security of individual applications, such as lighting, heating, or physical building security, are independent of each other. Different security keys are used for securing network layer operations, such as relaying vs securing the application-specific content of messages. For example, a light bulb has access to data transmitted by light switches because they have the same application key. The same light bulb can relay messages from an access token to the lock in the front door, but it can’t see the application layer content of those messages.

The Future of Bluetooth Mesh Networking

Bluetooth mesh networking is a highly efficient and fit-for-purpose topology designed to meet the demanding requirements of the Internet of Things (IoT), and we expect to see it adopted across a range of industry sectors. Commercial lighting is an especially exciting application for Bluetooth mesh as it lets you use lighting as a wireless platform for other building services, such as asset tracking and location.

If you plan on attending the IoT Tech Expo – November 29-30 in Santa Clara, CA, stop by booth 57 to see live demonstrations of Bluetooth mesh in action.

To learn more about Bluetooth mesh and to discover how Bluetooth mesh is disrupting the IoT, register for our free webinar on November 8 – What Makes Bluetooth Mesh so Disruptive?

The behind-the-scenes story of the making of Bluetooth mesh

The post An Intro to Bluetooth Mesh appeared first on IoT Tech Expo.

IoT Tech Expo

Leave a Reply

Your email address will not be published. Required fields are marked *